 |
| Quantity: | |
|---|---|
Descriptions:
CFQG-SK-150 NC High Precision paper core/tube cutting machine is suitable for re-cutting paper tubes & cores with wall thickness up to 15mm.
This machine is suitable for variety kinds of paper tubes such as textile cores; adhesive tape cores; film cores and other industrial paper tubes & cores.
-- PLC controlled Automatic Paper Core Cutting Machine adopts Computerized Control System. All the working parameters can be setup on the controlling panel (touch screen type) .
-- Computerized paramete setting make this machine works more precise and efficient.
-- Servo motor synchronism tracking cutting system let the machine cutting in a higher precision; error ≤ 0.15mm.
-- Paper tube fixed by automatic chuck; only paper tube rotates during the cutting process.Cutting length from 2mm to 1700mm and wall thickness from 3mm to 15mm.
| Main Parameters | Control System | ||
| Inner diameter | 50-152mm | Main motor | 2.2kw Wannan |
| Wall thickness | 3-15mm | Inverter | 3.7kw Delta |
| Original tube length | 1740mm | PLC | Xinjie |
| Cutting length | 5-1700mm | Operating panel | Xinjie |
| Cutting blade | Single blade(Tungsten Steel) | Servo motor | Yaskawa |
| Cutting way | Pneumatic (only tube rotates) | Moving rail | Shangyin |
| Speed | 1 pieces/sec. | Screw rod | Shangyin |
| Knife rest moving speed | 300mm/sec. | Electric components | CHNT |
| Tube fixing | by automatic chucks | Signal components | Hugong |
| Tube feeding | Manual | Pneumatic components | Jingwei |
| Tube unloading | Manual | Bearing | Haerbin |
| Speed regulation | by Inverter | Measurement & Weight | |
| Working air pressure | 0.6Mpa | Measurement | L2500*W650*H1220mm |
| Power supply | 380V 50Hz 3Phase | Weight | 900kgs |
| Operator | 1-2 persons | Enclosed Spare Parts | |
| Mandrel shaft | 2 pieces | ||
| Extra blades | 3 pieces | ||
| Tool | 1 set | ||
Descriptions:
CFQG-SK-150 NC High Precision paper core/tube cutting machine is suitable for re-cutting paper tubes & cores with wall thickness up to 15mm.
This machine is suitable for variety kinds of paper tubes such as textile cores; adhesive tape cores; film cores and other industrial paper tubes & cores.
-- PLC controlled Automatic Paper Core Cutting Machine adopts Computerized Control System. All the working parameters can be setup on the controlling panel (touch screen type) .
-- Computerized paramete setting make this machine works more precise and efficient.
-- Servo motor synchronism tracking cutting system let the machine cutting in a higher precision; error ≤ 0.15mm.
-- Paper tube fixed by automatic chuck; only paper tube rotates during the cutting process.Cutting length from 2mm to 1700mm and wall thickness from 3mm to 15mm.
| Main Parameters | Control System | ||
| Inner diameter | 50-152mm | Main motor | 2.2kw Wannan |
| Wall thickness | 3-15mm | Inverter | 3.7kw Delta |
| Original tube length | 1740mm | PLC | Xinjie |
| Cutting length | 5-1700mm | Operating panel | Xinjie |
| Cutting blade | Single blade(Tungsten Steel) | Servo motor | Yaskawa |
| Cutting way | Pneumatic (only tube rotates) | Moving rail | Shangyin |
| Speed | 1 pieces/sec. | Screw rod | Shangyin |
| Knife rest moving speed | 300mm/sec. | Electric components | CHNT |
| Tube fixing | by automatic chucks | Signal components | Hugong |
| Tube feeding | Manual | Pneumatic components | Jingwei |
| Tube unloading | Manual | Bearing | Haerbin |
| Speed regulation | by Inverter | Measurement & Weight | |
| Working air pressure | 0.6Mpa | Measurement | L2500*W650*H1220mm |
| Power supply | 380V 50Hz 3Phase | Weight | 900kgs |
| Operator | 1-2 persons | Enclosed Spare Parts | |
| Mandrel shaft | 2 pieces | ||
| Extra blades | 3 pieces | ||
| Tool | 1 set | ||
English
